project QadFinancials > class BSaf > method ApiStdMaintainTT
Description
Integration point for add/delete/modify
Parameters
tApiSaf | input | temp-table | |
icAction | input | character | |
ocLstPrimKey | output | character | |
ocLstReturn | output | character | |
ocLstRowId | output | character | |
oiReturnStatus | output | integer | Return status of the method. |
Internal usage
QadFinancials
program code (program7/bsaf.p)
/* ================================================== */
/* Method info: */
/* Saf will be loaded based on the logical key */
/* ================================================== */
/* ============================================================================= */
/* Clear the instance: */
/* this will also clear the t_s tables that where filled in ApiMaintainByDataset */
/* ============================================================================= */
<M-1 run ClearData (output viFcReturnSuper (oiReturnStatus)) in BSaf>
if viFcReturnSuper <> 0
then assign oiReturnStatus = viFcReturnSuper.
if oiReturnStatus < 0
then return.
/* ==================== */
/* Set default return */
/* Parameter validation */
/* ==================== */
Assign oiReturnStatus = -98
vlDraftInstanceCreated = false.
if icAction = ?
then assign icAction = '':U.
if icAction <> {&DAEMONACTION-SAVESTORE} and
icAction <> {&DAEMONACTION-SAVE} and
icAction <> {&DAEMONACTION-STORE} and
icAction <> {&DAEMONACTION-VALIDATE}
then do:
assign vcSafMsg = trim(subst(#T-2'SAF integration: the specified action &1 should be in the list &2.':255(14473)t-2#,
trim(icAction),
"{&DAEMONACTION-SAVESTORE},{&DAEMONACTION-STORE},{&DAEMONACTION-SAVE},{&DAEMONACTION-VALIDATE}":U))
oiReturnStatus = -1.
<M-3 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3355':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
return.
end. /*if icAction <> {&DAEMONACTION-SAVESTORE} and*/
/* ======================== */
/* Count main-table records */
/* ======================== */
for each tApiSaf no-lock:
assign viMainTableRecordCount = viMainTableRecordCount + 1.
end.
if viMainTableRecordCount = 0
then do:
assign vcSafMsg = trim(#T-4'SAF integration: no main SAF table records were found.':255(14474)t-4#)
oiReturnStatus = -1.
<M-5 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3356':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
return.
end. /*if viMainTableRecordCount = 0*/
/* ============= */
/* Start queries */
/* ============= */
<Q-6 run SafPrim (Start) in BSaf >
/* ================================ */
/* Start loop on main-table records */
/* ================================ */
for each tApiSaf by tApiSaf.tc_Rowid:
main-block: do:
/* ========== */
/* Initialize */
/* ========== */
assign vcSafMsg = '':U
vcRowId = '':U
vlWarningsFound = false
vlSaveAsDraft = icAction = {&DAEMONACTION-STORE}.
/* ============================================== */
/* Get the Saf_ID based on the logical key */
/* ============================================== */
if (tApiSaf.Saf_ID = ? or
tApiSaf.Saf_ID = 0) and
tApiSaf.SafCode <> ? and
tApiSaf.SafCode <> '':U and
tApiSaf.tcSafConceptCode <> ? and
tApiSaf.tcSafConceptCode <> '':U
then do:
<Q-7 run SafPrim (all) (Read) (NoCache)
(input ?, (SafID)
input tApiSaf.SafCode, (SafCode)
input tApiSaf.tcSafConceptCode, (SafConceptCode)
output dataset tqSafPrim) in BSaf >
find tqSafPrim where
tqSafPrim.tcSafCode = tApiSaf.SafCode and
tqSafPrim.tcSafConceptCode = tApiSaf.tcSafConceptCode
no-lock no-error.
if available tqSafPrim
then assign tApiSaf.Saf_ID = tqSafPrim.tiSaf_ID.
end. /* if (tApiSaf.Saf_ID = ? or */
/* ====================== */
/* Load/Create Saf */
/* ====================== */
if tApiSaf.Saf_ID = ? or
tApiSaf.Saf_ID = 0
then assign viFcReturnSuper = -4.
else do:
<M-8 run DataLoad (input ? (icRowids),
input string(tapisaf.Saf_ID) (icPkeys),
input ? (icObjectIds),
input ? (icFreeform),
input false (ilKeepPrevious),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
end. /* NOT if tApiSaf.Saf_ID = ? or */
if viFcReturnSuper = -4
then do:
assign viFcReturnSuper = 0.
<M-9 run DataNew (output viFcReturnSuper (oiReturnStatus)) in BSaf>
if viFcReturnSuper < 0
then assign vcSafMsg = trim(subst(#T-10'Cannot create a new instance. Error number &1.':255(14463)t-10#,string(viFcReturnSuper))).
find first tSaf no-error.
end. /* if viFcReturnSuper = -4 */
else do:
if viFcReturnSuper < 0
then assign vcSafMsg = trim(subst(#T-11'Cannot load the instance. Error number &1.':255(14464)t-11#,string(viFcReturnSuper))).
else do:
find tSaf where
tSaf.Saf_ID = tApiSaf.Saf_ID
no-lock no-error.
if not available tSaf
then assign vcSafMsg = trim(subst(#T-12'Cannot find the instance &1 after it has been loaded.':255(14465)t-12#,string(tApiSaf.Saf_ID))).
else assign tSaf.tc_Status = 'C':U.
end. /* NOT if viFcReturnSuper < 0 */
end. /* NOT if viFcReturnSuper = -4 */
/* ====================================== */
/* Check for errors in the previous block */
/* ====================================== */
if vcSafMsg <> '':U
then do:
assign ocLstReturn = ocLstReturn + chr(4) + (if viFcReturnSuper = 0 then '-3':U else string(viFcReturnSuper))
ocLstPrimKey = ocLstPrimKey + chr(4) + '*':U
ocLstRowId = ocLstRowId + chr(4) + '*':U
vlSaveAsDraft = false.
<M-13 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3357':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
leave main-block.
end. /* if vcSafMsg <> '':U */
/* ======================== */
/* Copy data for Saf */
/* ======================== */
buffer-copy tApiSaf except
Saf_ID
tcSafConceptCode
SafCode
tc_ParentRowid
tc_Rowid
tc_Status
to tSaf.
if tSaf.tc_Status = 'N':U
then assign tSaf.SafCode = tApiSaf.SafCode
tSaf.tcSafConceptCode = tApiSaf.tcSafConceptCode.
assign vcRowId = tSaf.tc_Rowid
tApiSaf.Saf_ID = tSaf.Saf_ID.
/*needed to set the prim-key after the save*/
/* =================================================== */
/* This is where it ends if only SaveAsDraft is needed */
/* =================================================== */
if vlSaveAsDraft
then do:
assign ocLstReturn = ocLstReturn + chr(4) + '-1':U
ocLstPrimKey = ocLstPrimKey + chr(4) + '*':U
ocLstRowId = ocLstRowId + chr(4) + '*':U.
leave main-block.
end. /* if vlSaveAsDraft */
/* ============ */
/* Set activity */
/* ============ */
if can-find(first tSaf where
tSaf.tc_Status = 'N':U)
then assign vcActivityCode = 'Create':U.
else if can-find(first tSaf where
tSaf.tc_Status = 'C':U)
then assign vcActivityCode = 'Modify':U.
/* ================= */
/* Validate the data */
/* ================= */
<M-14 run ValidateBC (output viFcReturnSuper (oiReturnStatus)) in BSaf>
if viFcReturnSuper < 0
then do:
assign ocLstReturn = ocLstReturn + chr(4) + string(viFcReturnSuper)
ocLstPrimKey = ocLstPrimKey + chr(4) + '*':U
ocLstRowId = ocLstRowId + chr(4) + '*':U
vlSaveAsDraft = (icAction <> {&DAEMONACTION-SAVE} and
icAction <> {&DAEMONACTION-VALIDATE}).
leave main-block.
end. /* if viFcReturnSuper < 0 */
else if viFcReturnSuper > 0
then assign vlWarningsFound = true.
/* ================ */
/* External updates */
/* ================ */
<M-15 run AdditionalUpdates (output viFcReturnSuper (oiReturnStatus)) in BSaf>
if viFcReturnSuper < 0
then do:
assign ocLstReturn = ocLstReturn + chr(4) + string(viFcReturnSuper)
ocLstPrimKey = ocLstPrimKey + chr(4) + '*':U
ocLstRowId = ocLstRowId + chr(4) + '*':U
vlSaveAsDraft = (icAction <> {&DAEMONACTION-SAVE} and
icAction <> {&DAEMONACTION-VALIDATE}).
leave main-block.
end. /* if viFcReturnSuper < 0 */
else if viFcReturnSuper > 0
then assign vlWarningsFound = true.
/* ============= */
/* Save the data */
/* ============= */
if icAction <> {&DAEMONACTION-VALIDATE}
then do:
<M-16 run DataSave (output viFcReturnSuper (oiReturnStatus)) in BSaf>
if viFcReturnSuper < 0
then do:
assign ocLstReturn = ocLstReturn + chr(4) + string(viFcReturnSuper)
ocLstPrimKey = ocLstPrimKey + chr(4) + '*':U
ocLstRowId = ocLstRowId + chr(4) + '*':U
vlSaveAsDraft = (icAction <> {&DAEMONACTION-SAVE} and
icAction <> {&DAEMONACTION-VALIDATE}).
leave main-block.
end. /* if viFcReturnSuper < 0 */
else if viFcReturnSuper > 0
then assign vlWarningsFound = true.
end. /* if icAction <> {&DAEMONACTION-VALIDATE} */
/* ============================================ */
/* Indicate that everything was saved correctly */
/* ============================================ */
assign ocLstReturn = ocLstReturn + chr(4) + (if vlWarningsFound then '1':U else '0':U)
ocLstPrimKey = ocLstPrimKey + chr(4) + string(tApiSaf.Saf_ID)
ocLstRowId = ocLstRowId + chr(4) + vcRowId.
end. /* main-block */
/* ================================================================== */
/* Handle errors: store if SaveAsDraft is needed */
/* Check: only 1 draft is allowed for a single bus-component instance */
/* ================================================================== */
if vlSaveAsDraft and
index(substring(ocLstReturn,r-index(ocLstReturn, chr(4)) + 1, -1, 'CHARACTER':U), '-':U) <> 0
/* negative return-status for this entry */
then do:
if vlDraftInstanceCreated = true
then do:
assign vcSafMsg = trim(#T-17'Only one draft instance can be created per method call.':255(13856)T-17#) +
chr(10) +
trim(#T-18'This second object cannot be stored as a draft instance and so is an error.':255(13879)t-18#).
<M-19 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3361':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
next.
end. /* if vlDraftInstanceCreated = true */
<M-20 run StoreState (input '(':U + string(tSaf.SafCode) + ')':U + trim(#T-19'Saf created via an API method.':200(14479)T-19#) (icDescription),
input ? (icUIClass),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
assign vlDraftInstanceCreated = true
entry(num-entries(ocLstReturn, chr(4)), ocLstReturn, chr(4)) = string(viFcReturnSuper)
entry(num-entries(ocLstPrimKey, chr(4)), ocLstPrimKey, chr(4)) = string(tApiSaf.Saf_ID)
entry(num-entries(ocLstRowId, chr(4)), ocLstRowId, chr(4)) = vcRowId.
end. /* if vlSaveAsDraft and */
end. /* for each tApiSaf by tApiSaf.tc_Rowid: */
/* ============ */
/* Stop queries */
/* ============ */
<Q-21 run SafPrim (Stop) in BSaf >
/* ============================================================ */
/* Trim the first character of ocLstReturn en primkey */
/* Check for correct number and format of the return parameters */
/* ============================================================ */
if length(ocLstReturn, "CHARACTER":U) > 1
then assign ocLstReturn = substring(ocLstReturn, 2,-1,"CHARACTER":U).
if length(ocLstPrimKey,"CHARACTER":U) > 1
then assign ocLstPrimKey = substring(ocLstPrimKey,2,-1,"CHARACTER":U).
if length(ocLstRowid, "CHARACTER":U) > 1
then assign ocLstRowid = substring(ocLstRowid, 2,-1,"CHARACTER":U).
if num-entries(ocLstReturn, chr(4)) <> viMainTableRecordCount or
num-entries(ocLstPrimKey,chr(4)) <> viMainTableRecordCount or
num-entries(ocLstRowid, chr(4)) <> viMainTableRecordCount
then do :
assign vcSafMsg = trim(#T-22'SAF concept integration: incomplete information returned by an API method. See other messages for further details.':255(14470)T-22#) +
chr(10) +
trim(substitute(#T-23'Main table records: &1.':255(310)T-23#,string(viMainTableRecordCount))) + chr(10) +
trim(substitute(#T-24'Return Statuses: &1.':255(311)T-24#,ocLstReturn)) + chr(10) +
trim(substitute(#T-25'Primary keys: &1.':255(312)T-25#,ocLstPrimKey)) + chr(10) +
trim(substitute(#T-26'Row IDs: &1.':255(313)T-26#,ocLstRowid))
oiReturnStatus = -3.
<M-27 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3363':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
return.
end. /* if num-entries */
/* ===================================================== */
/* Set global return status based on the individual ones */
/* ===================================================== */
if ocLstReturn = substring(fill("0":U + CHR(4),viMainTableRecordCount),1,length(ocLstReturn,"CHARACTER":U),"CHARACTER":U)
then assign oiReturnStatus = 0.
else do :
if index(ocLstReturn,"-":U) <> 0
then do :
assign vcSafMsg = trim(#T-28'An error has occurred while running this API method. See other error messages for more details.':255(301)T-28#)
oiReturnStatus = -1.
<M-29 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'E':U (icType),
input 1 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3364':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
end. /* if index(ocLstReturn,"-":U) <> 0 */
else do:
assign vcSafMsg = trim(#T-30'A warning has occurred while running this API method. See other error messages for more details.':255(302)T-30#)
oiReturnStatus = +1.
<M-31 run SetMessage (input vcSafMsg (icMessage),
input '':U (icArguments),
input '':U (icFieldName),
input '':U (icFieldValue),
input 'W':U (icType),
input 3 (iiSeverity),
input '':U (icRowid),
input 'QADFIN-3365':U (icFcMsgNumber),
input '' (icFcExplanation),
input '' (icFcIdentification),
input '' (icFcContext),
output viFcReturnSuper (oiReturnStatus)) in BSaf>
end. /* not if index(ocLstReturn,"-":U) <> 0 */
end. /* not if ocLstReturn */
Sample code: how to call this method through RPCRequestService (QXtend Inbound)
define temp-table ttContext no-undo
field propertyQualifier as character
field propertyName as character
field propertyValue as character
index entityContext is primary unique
propertyQualifier
propertyName
index propertyQualifier
propertyQualifier.
define dataset dsContext for ttContext.
define variable vhContextDS as handle no-undo.
define variable vhExceptionDS as handle no-undo.
define variable vhServer as handle no-undo.
define variable vhInputDS as handle no-undo.
define variable vhInputOutputDS as handle no-undo.
define variable vhOutputDS as handle no-undo.
define variable vhParameter as handle no-undo.
/* Create context */
create ttContext.
assign ttContext.propertyName = "programName"
ttContext.propertyValue = "BSaf".
create ttContext.
assign ttContext.propertyName = "methodName"
ttContext.propertyValue = "ApiStdMaintainTT".
create ttContext.
assign ttContext.propertyName = "applicationId"
ttContext.propertyValue = "fin".
create ttContext.
assign ttContext.propertyName = "entity"
ttContext.propertyValue = "1000".
create ttContext.
assign ttContext.propertyName = "userName"
ttContext.propertyValue = "mfg".
create ttContext.
assign ttContext.propertyName = "password"
ttContext.propertyValue = "".
/* Create input dataset */
create dataset vhInputDS.
vhInputDS:read-xmlschema("file", "xml/bsaf.apistdmaintaintt.i.xsd", ?).
vhParameter = vhInputDS:get-buffer-handle("tParameterI").
vhParameter:buffer-create().
assign vhParameter::icAction = <parameter value>.
vhParameter = vhInputDS:get-buffer-handle("tApiSaf").
vhParameter:buffer-create().
assign vhParameter::<field-name-1> = <field-value-1>
vhParameter::<field-name-2> = <field-value-2>
...
/* Connect the AppServer */
create server vhServer.
vhServer:connect("-URL <appserver-url>").
if not vhServer:connected()
then do:
message "Could not connect AppServer" view-as alert-box error title "Error".
return.
end.
/* Run */
assign vhContextDS = dataset dsContext:handle.
run program/rpcrequestservice.p on vhServer
(input-output dataset-handle vhContextDS by-reference,
output dataset-handle vhExceptionDS,
input dataset-handle vhInputDS by-reference,
input-output dataset-handle vhInputOutputDS by-reference,
output dataset-handle vhOutputDS).
/* Handle output however you want, in this example, we dump it to xml */
if valid-handle(vhExceptionDS)
then vhExceptionDS:write-xml("file", "Exceptions.xml", true).
if valid-handle(vhOutputDS)
then vhOutputDS:write-xml("file", "Output.xml", true).
/* Cleanup */
vhServer:disconnect().
assign vhServer = ?.
if valid-handle(vhInputDS)
then delete object vhInputDS.
if valid-handle(vhOutputDS)
then delete object vhOutputDS.
if valid-handle(vhExceptionDS)
then delete object vhExceptionDS.